Plumbing systems provide constant clean water and effectively dispose of waste and sewage. This helps minimize the spread of diseases through contaminated water. Proper plumbing also contributes to the structural integrity of a house by helping to prevent dampness and the formation of molds. For the plumbing to remain effective, you need to work with a plumbing contractor, suggests OKC Homes 4 You Management company. Here are some things plumbers can do for you:
Repair Pipes
For pipe repair, there are several methods a plumbing contractor may use. When repairing small leaks, they might opt for epoxy putty or pipe clamps as a temporary solution. When pipe damage is severe, the pipe has to be cut out, and the damaged section is replaced with a new pipe. In pipe relining, a relatively new technique, a felt liner coated with epoxy is inserted into the faulty pipe to form a new lining and prevent leakage.
When repairing damaged underground pipes, a plumber may use video inspection tools to identify problems before deciding on the most effective repair technique. For minimal damage, they may opt for a trenchless repair method, such as pipe bursting, because it is less invasive. If the deterioration is extensive, the homeowner might need whole-house repiping, a long and expensive process.
A plumbing contractor offers a wide range of services, from routine repairs to complex installations, making them an invaluable resource for homeowners. Whether you need help with leaky faucets, clogged drains, or new fixture installations, a skilled contractor can ensure the job is done efficiently. To learn more about Advantage Air Plumbing, Heating and Cooling, visit their website for information on their services and expertise in handling various plumbing needs.
Unclog Drains and Toilets
Sink drains are likely to clog with food debris, grease, and soap scum. It is common for bathroom sinks to be blocked by hair, toothpaste or soap scum. Hair and soap are the most common causes of blockages in shower and bathtub drains.
Toilets can clog due to the use of toilet paper, flushing of non-sanctioned items, or complications with the sewage system. Outdoor drains are likely to become obstructed with leaves, dirt, and other debris. In old buildings, tree roots can grow and block the pipes. In commercial buildings, floor drains or even grease traps may develop blockages.
Plumbers use different techniques to remove clogs. For mild blockages, they employ plungers or hand-operated augers. In more severe cases, they use motorized drain snakes and high-pressure water jetting equipment. Plumbers can also remove some parts of the pipes to attack a blockage at its source.
For insights on how versatile plumbing contractors can be, you might find this comment particularly useful. His comment is here, offering a comprehensive look at the wide range of services that plumbing professionals provide, from repairs to installations. This perspective can help you understand the breadth of expertise available in the industry and how it can benefit your projects.
Repair or Replace Water Heaters
Water heater repairs are necessary when the appliance drips or discharges rusty water. These problems can result from wear and tear through aging, sedimentation, or corrosion. Water heater malfunctions may also be indicated by a squeaking sound or water that is either too hot or too cold. Plumbers can discharge the tank to clear any accumulated debris, replace blown heating elements or thermostats, adjust joinery for leaks, or install fresh components. In the worst scenario, they replace the water heater with a new one.
Clear Sewer Line Blockages
There are several causes of sewer line blockages. Tree roots may grow into the pipes and cause blockages, and pipes can wear out or crack with time or due to shifting ground. Damaged pipes can cause slow draining, a foul smell, or even sewage backup.
Plumbers wash the pipes using high-pressure water jetting. Mechanical augers or “snakes” can also be used to break up clogs. Video cameras enable plumbers to identify obstructions and their severity. If pipe damage is extensive, plumbers might employ trenchless pipe lining or replacement. Chemical treatments can occasionally clear minor blockages. In the most severe cases, excavation may be required to access and fix the affected pipe.
Maintain and Repair Sump Pumps
A sump pump may begin to work ineffectively due to severe rain or flooding, a lack of power supply, or age and wear. Plumbers periodically check and maintain sump pumps. They clean the pit to ensure there is no debris and check the functionality of the pump and the float switch. Plumbers apply grease to moving parts and replace worn components such as impellers or check valves. If the pump is severely damaged, plumbers may have to replace the whole unit.
Install Water Filtration Systems
Hard water causes stains and scale buildup that can damage appliances. Some of the impurities that could be found in tap water include chlorine, lead, or bacteria. Plumbers determine water quality and advise filtration options. Whole-house systems are ideal for the main water line. Plumbers make sure that there is a tight seal to avoid any seepage.
Work With a Plumbing Contractor
A plumber’s training and experience enables them to skillfully identify the problem in your plumbing system and take the right action for repair. Equipped with specialized tools, a plumber can fix any leakage, blockage, or broken pipe—no matter how severe. Contact a professional plumbing contractor for plumbing repairs today.