Amiri MX2 Track Pants Amiri Distressed Jeans

| Published On:
Orah.co is supported by its audience. When you buy through links on our site, we may earn an affiliate commission. Learn More

AMIRI Jeans: Every Cut and Surface Explained

AMIRI is a Los Angeles house, and denim is the category everything else grew out of. The label was established by Mike Amiri in his hometown, and the about page dates that to 2014, while the earliest contemporaneous press release, from December 2014, puts it at 2013 and calls the launch a partnership with the retailer Maxfield. Whichever date you take, the debut came as an exclusive capsule at that store, the pieces carrying it hand-distressed and visibly repaired. Repair remains the operative verb, since the denim is abraded on purpose, then rebuilt with contrast material instead of patched invisibly. That one idea accounts for the price and the naming, though from outside the naming reads as more complicated than it is. Anyone who types amiri jeans into a search box usually wants to work out which names are shapes and which are surfaces. This walkthrough separates the two, then works through them fit by fit.

Fits and treatments form two distinct lists

The names in the line fall into two groups that operate differently. Fits make up the first group, since MX1, MX2, Stack, Thrasher, Shotgun, Carpenter, MA Fit and Baggy are cuts and constructions rather than motifs. Treatments make up the second group, because Bandana, Crystal, Stud, Eagle, Aloha and Monogram are motifs applied on top of those cuts. One treatment will cross several fits in a single season, and that is how an MX1 Bandana and a Crystal Thrasher end up on one rail. Writing about a Bandana jean as if it were a peer of the MX1 is the most common error in coverage of this brand. Once the two lists are held apart, the range reads as a handful of shapes online store in a rotating set of finishes.

MX1

The signature here is the MX1. Official copy calls it a skinny-fit jean in Italian stretch denim with classic five-pocket styling, hand-distressed and then repaired with pleated leather. The contrast is listed as ovine leather, and the panels are set into the abraded zones at knee and thigh instead of being laid on top as decoration. The composition runs 92 percent cotton, 6 percent elastomultiester and 2 percent elastane; it sits in the Core Collection; and it is made in the USA. Observed in market at $1,090, it falls at the top of the standard denim band. If you try one pair only, this is the reference the rest of the category gets measured against.

Stack

At an observed $750, Stack is the way in to core denim. The official description is a Stack jean in Italian stretch denim, skinny and five-pocket, carrying an intentional overdye treatment. What defines it is length, not distressing: the long engineered inseam has the leg concertina at the ankle over a boot or over amiri sneakers. That pooling is the design rather than a tailoring fault, so it should never require a size change. Composition is the same as the MX1, and it is also made in the USA. It is the quietest piece in the range, which makes it a dependable first pair.

Thrasher

Hand-distressing finds its clearest expression in Thrasher. A skinny, mid-rise cut in hand-worked Italian stretch denim, it comes with retailer copy describing the abrasion as mimicking what Mike Amiri applied to jeans in the nineties. It differs from the MX1 in having no structured leather panel, because the repair is done in abrasion and rebuilt fabric, never in an inserted material. Of every cut here it also reaches furthest, showing up at department stores and specialists together. Market variants run to Crystal Thrasher, Eagle Thrasher, Leather Thrasher and Hollywood Thrasher. Take it if you want the wear and none of the hardware.

Shotgun

Shotgun is the most aggressive of the current shapes. The house frames its frayed holes as a continuation of an exploration of material distortion through a specialised battle-worn treatment. In practice that means shot-through openings with sanded edges set into faded Italian denim, so it reads as impact rather than fade. It is made in straight-leg and skinny versions, and some carry the extended inseam that lets the leg stack. A Crystal Shotgun exists, which puts embellishment directly against destruction on one garment. This is the pair for when the treatment, not the silhouette, is the point.

MX2 and MX3

MX2 is beyond doubt a real name, though neither its status nor its definition is straightforward. Collection pages for MX2 have existed on the brand’s site, and they returned no live products when checked in 2026, while the model is still abundant at off-price retail and on resale. That leaves it archive-leaning rather than a current flagship cut. Sources also disagree about what defines it, with some describing bandana or contrast denim inserts in place of leather while retailer copy tilts toward ribbed leather patches, zippered knee vents and outseam zips. Honestly put, MX2 is the zip-detailed sibling of the MX1, and the descriptions in circulation do not agree. On the brand’s site MX3 appears only as a women’s Baggy MX3 at an observed $990, a motocross-inspired hybrid with no waistband, which means the repeated idea of a numbered men’s ladder is unverified.

Carpenter, Baggy and MA Fit

Skinny is not the whole story, and this group is where to send anyone who dislikes a narrow leg. Workwear detailing and a far more generous line arrive with Carpenter, Faded Carpenter and Carpenter Repaired Baggy. Washed Baggy and Baggy Cargo push further into volume, while the MA Fit jean lands between the poles as a modern regular cut. Repaired Boot Cut, Monogram Straight Leg, Track Jean and the Patchwork and Art Patch constructions are more real names in the same territory. As a group they occupy the same broad band as the skinny cuts, and the most heavily reconstructed pairs go above it. The roomier shapes have quietly become the more forgiving half of the category.

Treatments, and how they travel across the fits

The seasonal work sits mostly in the treatments, and that explains how a single shape reappears looking unrelated to itself. The clearest case is Bandana, since the paisley panel occupies precisely the structural position leather holds on an MX1. So it is a substitution rather than an ornament, and that is a really different thing from a print. Crystal is an embellishment laid over existing styles, with crystal pieces sitting at the top of the price band wherever they land. Stud, Eagle, Aloha and Monogram behave the same way, appearing on an amiri hoodie or a pair of shorts within one season. Product names generally parse from the front as treatment first and fit second.

  • MX1 Bandana Jacquard and MX1 International, in which pleated bandana print substitutes for the leather
  • Bandana Repair Straight Jean, a full product name in its own right
  • Crystal Thrasher, and Crystal Shotgun alongside it
  • Stud MX1 as well as Aloha MX1
  • MX2 Bandana and MX2 Plaid Patch, now mostly seen off-price

The observed prices, one fit at a time

What follows are observed market listings rather than an official price list, and the numbers change. Two channels behave differently enough to keep apart, namely full-price retail from the brand itself and large multi-brand stockists whose listings carry in-season markdowns. Browse amiri men across both and the same jean turns up at two very different numbers inside a single season. Discounting is structural: reductions of roughly 40 to 70 percent are visible in-season at authorised retailers and off-price arms, which makes any claim that the brand never marks down wrong. It is that sale floor which caps secondary-market prices too, with standard MX1 pairs changing hands well below full retail. Treat the table as a snapshot and re-check before acting on a single number.

The fit Defining feature Position in the range
MX1 Distressed zones with pleated ovine leather set in Signature cut, observed $1,090
Stack An inseam engineered long so it gathers at the ankle Entry point, observed $750
Thrasher Hand-distressing only, with no leather panel Core band, the broadest distribution
Shotgun Frayed openings shot through, sanded at the edges Core band, in straight and skinny
MX2 Zip detailing at knee and outseam, though sources conflict Leaning archive
Carpenter, Baggy, MA Fit Workwear detailing and modern roomy cuts Core through to the upper band
Baggy MX3 Motocross-inspired hybrid, no waistband Womenswear, observed $990

Sizing, care and country of origin

Fit guidance is buyer-reported rather than published, because full garment measurements are not released for every style. The core skinny cuts are deliberately narrow; waist sizing is broadly true to the labelled inch; and the leg is where the trouble is. Buyers with muscular thighs or calves commonly say they move a size or two one or two sizes to keep a slim line. Legs that look long on Stack and Shotgun are the stacking inseam doing its job, and no size change should follow. Care matters more here than on ordinary denim, because core pairs carry warnings about intentional shading variation and dye transfer and are spot-clean only, with no washing, bleaching, tumble drying or ironing. Country of origin varies by style, and while MX1 and Stack are made in the USA, the blanket claim that all amiri clothing comes out of Los Angeles is false.

Leave a Comment